top of page

Hyra Garngreier 600H®

600H 3
600H 2
600H
Hyra garngreier 600H® er en større og kraftigere utgave enn 400H. 600H er beregnet for fiskere som driver med profesjonelt helårsfiskeri langs kysten i den mellomstore sjarkflåten. Men med sin lave vekt er 600H egnet for båter helt ned i 7m størrelsen.

På lik linje med 400H er det hos 600H fokusert på vekt, brukervennlighet og kvalitet. Vekten er lav og utgjør liten destabiliserende faktor. 600H er lett å montere og demontere, det gjør det enklere å skifte til annet fiskeri.
600H kobles til båtens egen hydraulikk eller brukes med elektrisk hydraulikkpumpe tilkoblet 12V eller 24V batteri.

NB! Hyra garngreier 600H® er en garngreier og skal ikke brukes som en etterhaler.

Les under video stripen for teknisk informasjon.

Hyra Minigargreier 600Proff®

 

APPLICATION:

HYRA MINIGARNGREIER 600Proff® is a greater and more powerful edition than the 400H. 600Proff is customized for fishermen on a professional scale, along the coastline, and is intended for boats above 7 meters.e

Like the 400H , the 600Proff is focused on weight, userfrendlyness, and quality. The weight is low, and constitutes a small destabilizing factor. 600Proff is easy to assemble, and disasamble, which makes it easy to switch to other fishing.

600Proff can be connected to the boat's hydraulics or with an electric hydraulic pump connected to a 12V or a 24V battery. HYRA a/s sells this as an accessory. 

HYRA MINIGARNGREIER 600Proff® is a net-clearer and shall not be used for dragging the nets up from the water.

 

Technical info:

 

Nettoweight: 26kg

Inner width: 600mm

Outer width:710mm (with engine: 810mm)

maximum width inclusive net-catcher brackets: 940mm

Height: 540mm

The hydraulic control unit is mounted on the net-clearer Hoses between the engine and the hydraulic control unit are standard. 

HYRA MINIGARNGREIER 600Proff® is built in aluminum and acid-proof steel.

Recommended liters of oil per minute: 12-18 liters max: 20 liters

For larger pumps, use a reduction valve.

Standard hydraulic coupling is 3/8"

 

Contact for offers.

Klikk på Fil-ikonet til venstre for å hente bruksanvisningen.

Additional equipment for

             Hyra Minigarngreierer 600Proff

 360° turntable with welding plate

The turntable gives Hyra Minigarngreier 600Proff® a free rotation of 360°, with a grip that makes it easy to lock into any wanted position. The turntable makes the Hyra Net-clearers a more useful tool onboard. The turntable lays on a Teflon lining which gives a smooth rotation of the net-clearer.

The welding plate has good room for alternative suspension. 

By ordering a turntable with the 600Proff, it's delivered pre-mounted.

360° Turntable with suspension for Hyra Rigg 

If you are getting the Hyra Rigg® along with the Hyra minigarngreier 600Proff, we recommend this suspension. The turntable had the same properties as the Turntable with wielding plate, but this is a suspension designed for the Rigg.  The turntable lays on a Teflon lining which gives a smooth rotation to the net-clearer.

The suspension has an internal Teflon lining, which makes it easier to move the net-clearer back and forth on the boom, and makes it easy to lock into the desired position.

By ordering the turntable along with the 600Proff, it will be delivered pre-mounted. 

bottom of page